Materials · 6 min read
Standing Seam Metal Roofing Explained
Published
Standing seam is the premium metal roofing system: vertical panels joined by raised seams with no fasteners exposed to weather.
Why concealed fasteners matter
Exposed-fastener panels rely on thousands of rubber-gasketed screws. Those gaskets degrade and the screws back out with thermal cycling, and by year fifteen you're rescrewing the roof. Standing seam clips let panels expand and contract freely with nothing penetrating the weather surface.
Gauge and finish
24-gauge steel is our standard in hail country; 26-gauge is acceptable on outbuildings. Kynar 500 (PVDF) finishes resist chalk and fade dramatically better than cheaper polyester paints, and the difference shows clearly by year ten.
Panel profiles
Snap-lock panels suit most residential pitches. Mechanically seamed panels are required for low slopes and offer the best weather performance. Panels can be roll-formed on site to eliminate end laps on long runs.
What it costs
Expect $25,000 to $45,000 for a typical Miami Valley home, more for complex roofs with many hips and valleys. Simple gable roofs and barns are where metal delivers the best value per square foot.
If any of this applies to your own home, our metal roofing crews handle it every week, and you can see how we work in your area on our Troy, Ohio roofing page. Inspections and written estimates are free either way — call 937-749-7767.